Taisei-kako co.,ltd.
HOME > Pharmaceutical Packages > PTP (Press Through Packages) Sheets

Pharmaceutical Packages
PTP (Press Through Packages) Sheets

TAS series have high performances of vapor proof, transparency and moldability.

PTP sheets are now mainstream of packaging for tablet / capsule medicines. PTP sheets assure the effectiveness, safety and stability of the pharmaceutical, enhance the protection and reliability, and well known for keeping the quality as packaging. Followings are showing the TAS series of PTP sheets.



TAS Series of PTP Sheets

TAS series of PTP sheers have high performances of vapor proof, transparency and moldabity, and fulfill the required items for the pharmaceutical packaging.
Having an abundant variety of TAS series from mono layer to multi layers, we can supply a wide range of needs.

Unsurpassed in Product Properties

Properties
  • Basic materials are Polypropylene (CPP) and Cyclic Olefin Copolymer (COC.).
  • There are 5 grades in CPP products.TAS-0000,TAS-1100,TAS-2200,TAS-3200,and TAS A2
  • There are 2 grades in COC products. TAS-200 and TAS-300.
  • On light blocking property: Possible to correspond from ultraviolet to visible light (less than 500nm)
  • Orange, red and we will meet your request color as much as we can.

Acquired Safety Certificates

  • Notification No 20 (16 Feb 1979) by the Ministry of Welfare: Passed all tests
  • Acquired the Certification of Japan Hygienic Olefin And Styrene Plastics Association
  • DMF No is registered by the FDA

TAS Series and Characteristics

Series Grade Thickness Against Light Blocking
/Change Color
Characteristics Basic Configuration Usable Molding Machine
TAS-0000 Mono Layer
CPP
300μm ×
  • Impact Resistance
TAS-0000 Exclusive Machine
TAS-1100 250μm ×
  • Machinery Aptitude
  • High gas permeability
300μm
TAS-2200 Multi Layers
CPP
250μm
  • Machinery Aptitude
  • Moisture-proof
TAS-2200
300μm
TAS-3200 Multi Layers
CPP
PVDC
300μm
  • Machinery Aptitude
  • High Moisture-proof
  • Low Gas permeability
TAS-3200
TAS-200 Multi Layers
COC
250μm
300μm
350μm
  • High Machinery Aptitude
  • High Moisture-proof
  • High Transparency
  • Low Curl Property
TAS-200 PVC Machine Usable by Conversion
TAS-300 Multi Layers
CPP
PVDC
300μm
  • High Machinery Aptitude
  • High Moisture-proof
  • High Transparency
  • Low Gas permeability
  • Cul Property
TAS-300
TAS A2 Multi Layers
CPP
PCTFE
270μm
  • Machinery Aptitude
  • Ultra Moisture-proof
  • Low Gas permeability
TAS A2 Exclusive Machine
300μm
330μm

Characteristics of CPP Sheets (TAS-0000・1100・2200・3200)

Characteristics
  • In comparison with conventional PVC sheets, CPP sheets have higher moisture-proof.
  • By improvement of sheeting process, the machinery aptitude is advanced.
  • Bending and stretching are good in properties. Due to the properties, these sheets are good for blister property.
  • Due to less warpage caused by secondary shrinkage, handling aptitude is appropriate.
  • Due to PVDC coating film, TAS-3200 has high moisture-proof and low gas permeability properties.

Characteristics of COC (Cyclic Olefin Copolymer) Sheets (TAS-200・300)

Characteristics
  • In comparison with conventional PTP sheets, COC sheets have higher moisture-proof.
  • In comparison with CPP sheets, COC sheets have higher transparency.
  • Blister machine for PVC sheets is usable to mold.
  • It is possible to cut COC sheets by hand along the line of perforation just the same way as PVC sheets.
  • Due to low shrinkage by molding, the curling phenomenon after molding occurs little or nothing.
  • Blister machine is usable for high-speed molding and
  • Due to olefin resin, no hazardous material is released at the incineration.

Characteristics of CPP / PCTFE Sheets (TAS A2)

Characteristics
  • Laminated sheets with Aclar R of which the film is with high barrier property.
  • In comparison with conventional PTP sheets, PCTFE sheets have extremely high barrier property (moisture ・gas).
  • Since the base material is made of CPP sheet, molding machine in present use is usable.

PTP Packaging Production Process

PTP Packaging Production Process


  • Winding

    Winding

  • Laminate

    Laminate

  • Inspection /Slitter

    Inspection /Slitter


Pharmaceutical Packages

Please contact with us Tel:072-643-5791 Fax:072-640-2508 Taisei Kako Co., Ltd. Headquarter PC:567-0054 2-11-6,Fujinosato,Ibaraki city,Osaka pref お問い合わせ・資料請求